https://edburdick.net/mw/index.php?title=Clamps&feed=atom&action=historyClamps - Revision history2024-03-28T18:30:29ZRevision history for this page on the wikiMediaWiki 1.31.14https://edburdick.net/mw/index.php?title=Clamps&diff=766&oldid=prevEburdick: /* Tool Maker's Vise */2014-09-03T18:27:29Z<p><span dir="auto"><span class="autocomment">Tool Maker's Vise</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 18:27, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l43" >Line 43:</td>
<td colspan="2" class="diff-lineno">Line 43:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Tool Maker's Vise==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Tool Maker's Vise==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Though drill press vises are very useful, there is a tendency for the moving jaw to move slightly upward when the work is clamped.  In general use, this is not a major issue, but it does result in the hole being drilled slightly off of perpendicular.  Essentially, whether or not the jaws end up parallel depends on where the work is being clamped.  An alternative type of vise is a tool maker's vise, which clamps in a way that forces the jaws to stay parallel.  Typically this is done by forcing the moving jaw diagonally onto a precision ground bed at the same time the work is being clamped.  Tool maker's vises are a bit harder to set up, but keep everything square and parallel.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Though drill press vises are very useful, there is a tendency for the moving jaw to move slightly upward when the work is clamped.  In general use, this is not a major issue, but it does result in the hole being drilled slightly off of perpendicular.  Essentially, whether or not the jaws end up parallel depends on where the work is being clamped.  An alternative type of vise is a tool maker's vise, which clamps in a way that forces the jaws to stay parallel.  Typically this is done by forcing the moving jaw diagonally onto a precision ground bed at the same time the work is being clamped.  Tool maker's vises are a bit harder to set up, but keep everything square and parallel<ins class="diffchange diffchange-inline">. The example in the picture has slots along the sides and ends for clamping to the table using t-slot clamping sets as described below</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:tool-makers-vise-1.png]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:tool-makers-vise-1.png]]</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=765&oldid=prevEburdick: /* T-Slot Nuts and/or bolts, flange nuts and studs, strap clamps, step blocks */2014-09-03T18:25:06Z<p><span dir="auto"><span class="autocomment">T-Slot Nuts and/or bolts, flange nuts and studs, strap clamps, step blocks</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 18:25, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l51" >Line 51:</td>
<td colspan="2" class="diff-lineno">Line 51:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>These come in different sizes, so you have to check the size of the T-slots where you want to use them.  They fit into the table slots on the drill press and are great for holding down a drill press vise, other clamping fixtures, or the item you are drilling.  This stuff is pretty inexpensive, and is much more effective than using c-clamps.  As part of this type of clamping system, there are clamping bars that can be used for holding work or fixtures that do not have clamping tabs or slots. Many of these have steps for use with step blocks as shown below.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>These come in different sizes, so you have to check the size of the T-slots where you want to use them.  They fit into the table slots on the drill press and are great for holding down a drill press vise, other clamping fixtures, or the item you are drilling.  This stuff is pretty inexpensive, and is much more effective than using c-clamps.  As part of this type of clamping system, there are clamping bars that can be used for holding work or fixtures that do not have clamping tabs or slots. Many of these have steps for use with step blocks as shown below.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-components<del class="diffchange diffchange-inline">.png]][[file:t-bolt</del>.png]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-components.png]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-bar.png]] <del class="diffchange diffchange-inline">[[file:table-clamping-bar2.png]] </del>[[file:step-block-clamp-example.png]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-bar.png]]  </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:step-block-clamp-example.png]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You can also get a clamping set that has a lot of of these components for just over $100</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You can also get a clamping set that has a lot of of these components for just over $100</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=763&oldid=prevEburdick: /* T-Slot Nuts and/or bolts, flange nuts and studs */2014-09-03T18:22:45Z<p><span dir="auto"><span class="autocomment">T-Slot Nuts and/or bolts, flange nuts and studs</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 18:22, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l47" >Line 47:</td>
<td colspan="2" class="diff-lineno">Line 47:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:tool-makers-vise-1.png]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:tool-makers-vise-1.png]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>==T-Slot Nuts and/or bolts, flange nuts and studs==   </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>==T-Slot Nuts and/or bolts, flange nuts and studs<ins class="diffchange diffchange-inline">, strap clamps, step blocks</ins>==   </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>These come in different sizes, so you have to check the size of the T-slots where you want to use them.  They fit into the table slots on the drill press and are great for holding down a drill press vise, other clamping fixtures, or the item you are drilling.  This stuff is pretty inexpensive, and is much more effective than using c-clamps.  As part of this type of clamping system, there are clamping bars that can be used for holding work or fixtures that do not have clamping tabs or slots. Many of these have steps for use with step blocks as shown below.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>These come in different sizes, so you have to check the size of the T-slots where you want to use them.  They fit into the table slots on the drill press and are great for holding down a drill press vise, other clamping fixtures, or the item you are drilling.  This stuff is pretty inexpensive, and is much more effective than using c-clamps.  As part of this type of clamping system, there are clamping bars that can be used for holding work or fixtures that do not have clamping tabs or slots. Many of these have steps for use with step blocks as shown below.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-components.png]][[file:t-bolt.png]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-components.png]][[file:t-bolt.png]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-bar.png]] [[file:table-clamping-bar2.png]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-bar.png]] [[file:table-clamping-bar2<ins class="diffchange diffchange-inline">.png]] [[file:step-block-clamp-example</ins>.png]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You can also get a clamping set that has a lot of of these components for just over $100</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You can also get a clamping set that has a lot of of these components for just over $100</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=761&oldid=prevEburdick: /* Drill press vise */2014-09-03T18:10:50Z<p><span dir="auto"><span class="autocomment">Drill press vise</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 18:10, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l40" >Line 40:</td>
<td colspan="2" class="diff-lineno">Line 40:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:drill-press-vise-cheap.png]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:drill-press-vise-cheap.png]]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">==Tool Maker's Vise==</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Though drill press vises are very useful, there is a tendency for the moving jaw to move slightly upward when the work is clamped.  In general use, this is not a major issue, but it does result in the hole being drilled slightly off of perpendicular.  Essentially, whether or not the jaws end up parallel depends on where the work is being clamped.  An alternative type of vise is a tool maker's vise, which clamps in a way that forces the jaws to stay parallel.  Typically this is done by forcing the moving jaw diagonally onto a precision ground bed at the same time the work is being clamped.  Tool maker's vises are a bit harder to set up, but keep everything square and parallel.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[file:tool-makers-vise-1.png]]</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==T-Slot Nuts and/or bolts, flange nuts and studs==   </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==T-Slot Nuts and/or bolts, flange nuts and studs==   </div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=760&oldid=prevEburdick: /* Kant Twist Clamps */2014-09-03T15:22:18Z<p><span dir="auto"><span class="autocomment">Kant Twist Clamps</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 15:22, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l72" >Line 72:</td>
<td colspan="2" class="diff-lineno">Line 72:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Kant Twist Clamps==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Kant Twist Clamps==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.  These vary in price from about $15 for a shallow one inch opening to around $45 for a six inch.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.  <ins class="diffchange diffchange-inline">There is a variety of jaw styles and other features. </ins>These vary in price from about $15 for a shallow one inch opening to around $45 for a six <ins class="diffchange diffchange-inline">inch or $185 for a 12 </ins>inch.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">[[file:kant-twist-clamp.png]] </del>[[file:kant-twist-variety.png<del class="diffchange diffchange-inline">|300px</del>]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-variety.png]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=758&oldid=prevEburdick: /* Kant Twist Clamps */2014-09-03T15:19:00Z<p><span dir="auto"><span class="autocomment">Kant Twist Clamps</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 15:19, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l74" >Line 74:</td>
<td colspan="2" class="diff-lineno">Line 74:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.  These vary in price from about $15 for a shallow one inch opening to around $45 for a six inch.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.  These vary in price from about $15 for a shallow one inch opening to around $45 for a six inch.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-<del class="diffchange diffchange-inline">set</del>.png|300px]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-<ins class="diffchange diffchange-inline">variety</ins>.png|300px]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=755&oldid=prevEburdick: /* T-Slot Nuts and/or bolts, flange nuts and studs */2014-09-03T05:11:17Z<p><span dir="auto"><span class="autocomment">T-Slot Nuts and/or bolts, flange nuts and studs</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 05:11, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l43" >Line 43:</td>
<td colspan="2" class="diff-lineno">Line 43:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==T-Slot Nuts and/or bolts, flange nuts and studs==   </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==T-Slot Nuts and/or bolts, flange nuts and studs==   </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>These come in different sizes, so you have to check the size of the T-slots where you want to use them.  They fit into the table slots on the drill press and are great for holding down a drill press vise, <del class="diffchange diffchange-inline">or </del>other clamping fixtures.  This stuff is pretty inexpensive, and is much more effective than using c-clamps.  As part of this type of clamping system, there are <del class="diffchange diffchange-inline">also </del>clamping bars that can be used for holding work <del class="diffchange diffchange-inline">directly</del>. Many of these have <del class="diffchange diffchange-inline">precision </del>steps as shown below.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>These come in different sizes, so you have to check the size of the T-slots where you want to use them.  They fit into the table slots on the drill press and are great for holding down a drill press vise, other clamping fixtures<ins class="diffchange diffchange-inline">, or the item you are drilling</ins>.  This stuff is pretty inexpensive, and is much more effective than using c-clamps.  As part of this type of clamping system, there are clamping bars that can be used for holding work <ins class="diffchange diffchange-inline">or fixtures that do not have clamping tabs or slots</ins>. Many of these have steps <ins class="diffchange diffchange-inline">for use with step blocks </ins>as shown below.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-components.png]][[file:t-bolt.png]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:table-clamping-components.png]][[file:t-bolt.png]]</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=754&oldid=prevEburdick: /* Kant Twist Clamps */2014-09-03T05:07:42Z<p><span dir="auto"><span class="autocomment">Kant Twist Clamps</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 05:07, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l72" >Line 72:</td>
<td colspan="2" class="diff-lineno">Line 72:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Kant Twist Clamps==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Kant Twist Clamps==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge<ins class="diffchange diffchange-inline">.  These vary in price from about $15 for a shallow one inch opening to around $45 for a six inch</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-set.png|300px]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-set.png|300px]]</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=753&oldid=prevEburdick: /* Kant Twist Clamps */2014-09-03T05:02:58Z<p><span dir="auto"><span class="autocomment">Kant Twist Clamps</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 05:02, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l74" >Line 74:</td>
<td colspan="2" class="diff-lineno">Line 74:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-set.png]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-set.png<ins class="diffchange diffchange-inline">|300px</ins>]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td></tr>
</table>Eburdickhttps://edburdick.net/mw/index.php?title=Clamps&diff=752&oldid=prevEburdick: /* Kant Twist Clamps */2014-09-03T05:00:54Z<p><span dir="auto"><span class="autocomment">Kant Twist Clamps</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 05:00, 3 September 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l74" >Line 74:</td>
<td colspan="2" class="diff-lineno">Line 74:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This come in a variety of sizes, hold tightly, and work well in close quarters.  They are not always a good substitute for a toolmaker's parallel clamp, but they are much easier to use and almost as secure. The freely rotating pads at the ends of the jaws align easily with the surface of the clamped item, and there is a v-groove on one side for holding small cylindrical objects. The rotating pads do, however, make these mostly useless if you need to clamp very close to an edge.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]][[file:kant-twist-set.png]]</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[file:kant-twist-clamp.png]] [[file:kant-twist-set.png]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==V Blocks==</div></td></tr>
</table>Eburdick